IKEA PAX Fully Fitted Wardrobes – Case Studies

IKEA PAX Sliding Mirrored Door Customisation & Installation

The brief: Create 4 metres of wardrobe space. Using a combination of mirror and blue doors. Creating a floor to ceiling installation to give that fully fitted wardrobe look.

Specification: IKEA PAX 4 x 100 CM frames, 2 sets of 200 CM Sliding doors. Personalised internal design chosen by the customer

Customisations: Infill above 2 sets of sliding door with side infills going back to the wall 2 x at each end  to give that fully fitted look. 

IKEA PAX – Custom Fit Wall to Wall and Floor to Ceiling

The brief:  Create over 4 meters of usable Corner Wardrobe, floor to ceiling installation. Using in-fills for that fully fitted wardrobe look.

Specification: IKEA PAX Corner Wardrobe. Using 3 x PAX 100 CM, 1 x corner wardrobe and 1 x 50 CM Wardrobe. Add 7 Hinged doors and customer chosen personalised internals.

Customisations & In Fills – 10 infills in total. 7 infills above doors and at 2 infills at either side. Along with 1 infill at each end, to give that fully fitted look. The client also selected custom handles and personalised the internal area.

IKEA PAX – Corner Wardrobe, floor to ceiling install

The brief: Custom fit 3,500 wide x 236cm high IKEA PAX Wardrobe into an area that was 5,490 wide x 235 high. To create a fully fitted floor to ceiling and wall to wall installation.  We cut down the IKEA Wardrobe frames and doors to fit in the remaining area.  

Specification: IKEA PAX Wardrobe, 3 x PAX 100cm + 1 x 50cm  frames 7 x doors and personalised interior with lights chosen by the customer. This customer opted for the premium finish.

Customer third party purchase

PAX Customisations: Cut down 4 x frames , 1 x Frame width cut. 1 x  door width trimmed down and re-edged. In-fill above with silicone. Side in-fills x 2 at each end to give that fully fitted look.  In order to achieve the premium finish, we reversed the panels and custom drill the holes

IKEA PAX installation with sloping ceilings

The brief: Fully fitted IKEA wardrobe into an eaves area. Keeping the dado rail as it was a feature the customer wished to retain. Creating 2 meters of usable straight wardrobe, with a floor to ceiling installation. 

Specification: IKEA PAX Wardrobe, 2 x PAX 100 CM, 4 x Hinged doors and personalised internals chosen by the customer.

PAX Customisations: 2 x frames customised by angle cutting to accommodate the eaves at the back. Cut to fit around dado rail.  Infill above doors x 4. In-fills x 2 at each end to give that fully fitted look. 

Product IKEA Wardrobe cost: £625

Installation price bracket: £500 – £750

IKEA PAX Custom Installation Including Alcove

The brief: Custom fit 6 Meters wide x 236 CM high of IKEA PAX Wardrobe into an area that was 5.7 Meters wide by 214 high. With eaves off to one side. Creating a fully fitted floor to ceiling and wall to wall installation. Reduce the height on all IKEA wardrobe frames and doors. 

Specification: IKEA PAX Wardrobe. 3 x PAX 100 CM,  6 x 50 CM  frames 12 x doors. The Customer chose to personalise the internals and add interior lights.

Handles: IKEA push to open.

Customisations: Reduce the depth on all the frames and angle cut them to slot into to the dormer behind.  Width reduction on the frames and 4 angled cuts. Infill above the wardrobe in the eaves front area. Height and width trim down on 12 doors. We carried out custom cuts on the shelves, rails and Kompliment drawers to fit the new width. We infilled above and to the sides of the wardrobe with silicone to give that fully fitted look.